crude drawings

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Kaegi [108.162.245.105] on Wednesday, July 06, 2022 at 20:42:59 :

In Reply to: Re: Back to the billet head pipe dream.... posted by Kaegi [162.158.107.204] on Wednesday, July 06, 2022 at 20:22:15 :

her is pic one. even if I went between the pushrods it could still be at least an inch wide on the exhaust port and much taller than that if desired. valves could be rotated like in the end pic. custom rockers are needed anyway so why not for better flow on both sides

Follow Ups:

Re: crude drawings - Scotty 19:57:43 07/07/2022

Re: crude drawings - Kaegi 12:05:38 07/08/2022

Re: crude drawings - Chris Case 21:48:47 07/06/2022

Re: crude drawings - Kaegi 12:44:21 07/07/2022

Re: crude drawings #2 - Kaegi 20:44:47 07/06/2022

Re: Rocker oiling? - Chris Case 08:39:54 07/07/2022
- Bore centers - Kaegi 12:18:47 07/08/2022
  - Re: Bore centers - Kaegi 12:36:00 07/08/2022
    - Re: Bore centers - Chris Case 16:36:28 07/08/2022
      - Re: Ford Courier. nm - Chris Case 16:38:29 07/08/2022
        
        Re: Ford Courier 1.8 Hemi... Head bolt pattern? - Chris Case 17:00:57 07/08/2022
        
        Re: Ford Courier 1.8 Hemi.. McCord CH300 head gasket - Chris Case 17:15:36 07/08/2022
        
        Re: Ford Courier 1.8 Hemi.. - Chris Case 22:15:54 07/08/2022
        
        Re: Ford Courier 1.8 Hemi.. - Kaegi 02:10:45 07/09/2022
        
        Re: Ford Courier 1.8 Hemi.. - Kaegi 02:26:17 07/09/2022
        
        Re: Ford Courier 1.8 Hemi.. - Chris 10:15:05 07/10/2022
        
        Re: Ford Courier 1.8 Hemi.. - Kaegi 11:11:17 07/10/2022
        
        Re: Ford Courier 1.8 Hemi.. Two heads better than one... - Chris Case 16:21:15 07/11/2022
        
        Re: Ford Courier 1.8 Hemi.. Two heads better than one... - Kaegi 01:24:37 07/12/2022
        
        Re:What engine in your pic? - Chris Case 21:24:08 07/12/2022
        
        Re:What engine in your pic? - Kaegi 02:01:59 07/13/2022
        
        Arkus/Duntov Utube - Chris Case 15:39:51 07/13/2022
        
        Re: Arkus/Duntov Utube - Kaegi 16:56:43 07/13/2022
        
        Re: Arkus/Duntov Utube - Chris Case 18:45:03 07/13/2022
        
        Re: Arkus/Duntov Utube - Kaegi 19:42:08 07/13/2022
        
        Re: Arkus/Duntov Utube - Chris Case 23:07:12 07/13/2022
        
        Re: Arkus/Duntov Utube - Kaegi 13:41:40 07/14/2022
        
        Re: Arkus/Duntov Utube - Chris Case 19:25:55 07/14/2022
        
        Welding 2 heads together - Chris Case 09:01:33 07/15/2022
        
        Re: Welding 2 heads together - Kaegi 11:22:24 07/16/2022
        
        Re: Welding 2 heads together - Chris Case 14:19:43 07/16/2022
        
        Re: Welding 2 heads together - Kaegi 23:07:57 07/16/2022
        
        Re: Just as much work either way - Chris Case 08:01:12 07/17/2022
        
        Re: WOW Count the parts !!! - Chris Case 15:00:45 07/18/2022
        
        Re: Welding 2 heads together - Bob 19:09:22 07/15/2022
- Re: Rocker oiling? - Kaegi 12:04:38 07/08/2022

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button