Posted by Paul(in NY) [12.64.186.139] on Tuesday, January 20, 2015 at 12:36:11 :
In Reply to: Stuck clutch posted by Desoto61 [138.162.0.43] on Tuesday, January 20, 2015 at 11:54:58 :
I am with Keith. Very good chance you still have some air in the clutch system which is not allowing full clutch disengagement. Since the NV-4500 Slave cylinders dont have a bleed port, they can be difficult. If you choose, click on the link below and go to the album "NV-4500 Slave Fitting Modification". I describe a bleed method I use and has never failed to rid all the air.
Be sure you have the 'right' NV-4500 Slave cylinder. The cylinder for the Dodge and GM are different. Are you sure you have the 'right' throwout bearing ?
Other wise if that does not fix your problem, now is the time to open her up and release the stuck disk.
Paul
Follow Ups: