Posted by Adam [172.71.142.146] on Monday, November 07, 2022 at 22:01:52 :
In Reply to: dilemma posted by Todd [172.70.211.76] on Monday, November 07, 2022 at 17:02:59 :
I made an L shaped jig for my cab. Basically a short rectangle frame with the rear wheels protruding out the back and removable vertical arms bolted to the protruding frame. I made it out of rectangular metal tubing, about the size of a 2x4. Swivel casters on all corners so I could spin it around. It bolted to the bottom so I could tilt it on its back when the vertical arms were in place. Later I modified it to hold a 440 and transmission on its K-frame, so I could roll it under my Challenger and install the engine from the bottom.