Posted by Vaughn [23.116.56.126] on Tuesday, December 14, 2021 at 10:19:08 :
In Reply to: I'd do cam and valve springs first. posted by Chris Case [172.70.210.153] on Tuesday, December 14, 2021 at 08:30:23 :
It probably could be bored off-center and crank ground wider, just weld the opposite side to off-set the grind. A really good machine shop would be required. I've never blown a headgasket and mine is .040, but then I periodically re-torque the head. If you over-heat the engine to a boil, then you can definitely plan on experiencing a blow headgasket at some point.