Posted by Torvald [172.68.142.236] on Sunday, April 11, 2021 at 23:25:08 :
In Reply to: Re: Transfer Case Bracket Insulator Spacer posted by Vaughn [172.68.132.56] on Sunday, April 11, 2021 at 18:54:00 :
Ooooooo, I wasn't aware of the video, thanks. Unfortunately, the spacers are already in place at the start of the video, but it looks as though the washer on the spacers is on the bottom of the insulator assembly, and the tube is pointing ‘up’. There were also 6 large washers (probably fender washers) that were associated with the insulator assemblies. Would those be spacers to go between the upper insulators and the transfer case cross-member to adjust the alignment of the case?
Hmmmm, on looking at the video of removing the transfer case it looks as though the washer of the spacer is on the top of the insulator assembly with the tube pointed down, and the fender washers are on the bottom.
Follow Ups: