Re: Transfer Case Bracket Shimming

Posted by Chris Case [108.162.215.175] on Monday, April 12, 2021 at 09:47:44 :

In Reply to: Re: Transfer Case Bracket Insulator Spacer posted by Vaughn [172.68.189.250] on Monday, April 12, 2021 at 09:02:06 :

Use 1/2" fender washers as shims to adjust the rear drive shaft angles to match about one degree.It will really help with noise and vibrations.Coincidentally, shimming for the rear also brought the intermediate angle in to symmetricity. Front driveshaft is not usually engaged, so who cares.

Also shim up the cab/replace mounts. Get it up off the frame at the front corner of the floor cut out.MUUUCH quieter that way.

mail me a reminder to get the sleeve length, it's in my notes

Follow Ups:

• Re: Transfer Case Bracket Shimming - Torvald 17:18:29 04/12/2021
• Re: Transfer Case Bracket Shimming - Clint Dixon 13:09:12 04/12/2021
  • Found the Service Bulletin - Clint Dixon 19:07:10 04/12/2021
    • Re: Found the Service Bulletin - Vaughn 08:37:58 04/14/2021
      • Re: Found the Service Bulletin - Clint Dixon 10:00:43 04/14/2021
        • Re: Found the Service Bulletin - Vaughn 15:58:37 04/14/2021
    • Re: Found the Service Bulletin - Torvald 00:24:29 04/13/2021
  • Re: Transfer Case Bracket Shimming - Torvald 17:13:40 04/12/2021

Post a Followup