Stakebed fab

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Steve in FH [172.68.174.7] on Saturday, March 03, 2018 at 14:41:35 :

I am planning on a flatbed for a '49 FF. Fleming Metals produces rails with punched out stake pockets in 7 gauge or 10 gauge steel by 5 5/8 and will ship to a freight yard on the mainland. Will deck it with 7/8- 1" rough sawn fir. I was going to use the 10 gauge but now am wondering if it will be too light. Not doing any heavy hauling, just errands and cordwood. Any suggestions- 7 ga or 10ga

Follow Ups:

Re: Stakebed fab - Randy On Long Island 14:32:48 03/05/2018

Re: Stakebed fab - Drew Reed 23:06:43 03/06/2018
- Re: Stakebed fab - Steve in FH 13:13:22 03/07/2018
  - Re: Stakebed fab - Drew Reed 19:08:52 03/07/2018
- Re: Stakebed fab - Ray 06:09:30 03/07/2018
  - Re: Stakebed fab - Drew Reed 10:12:32 03/07/2018
    - Re: Stakebed fab - Ray 10:20:05 03/07/2018
      - Re: Stakebed fab - Drew Reed 19:10:13 03/07/2018
        
        Re: Stakebed fab - Ray 12:40:04 03/09/2018
        
        Re: Stakebed fab - Ray 12:32:48 03/09/2018
        
        Re: Stakebed fab - Drew Reed 21:46:39 03/09/2018
        
        Re: Stakebed fab - Ray 22:19:57 03/09/2018
Re: Stakebed fab - Steve in FH 11:18:21 03/06/2018
- Re: Stakebed fab - Randy On Long Island 16:47:29 03/06/2018
  - Re: Stakebed fab - Steve in FH 18:30:09 03/06/2018
    - Re: Stakebed fab - Randy On Long Island 20:37:01 03/06/2018
      - Re: Stakebed fab - Steve in FH 23:03:11 03/06/2018
Re: Stakebed fab - Jerry in Idaho 18:17:27 03/05/2018
- Re: Stakebed fab - Randy On Long Island 17:02:17 03/06/2018

Re: Stakebed fab - Jerry in Idaho 20:11:04 03/04/2018

Re: Stakebed fab - Steve in FH 05:33:22 03/05/2018

Re: Stakebed fab - Joe Cimoch 13:50:03 03/04/2018

Re: Stakebed fab - Steve in FH 18:48:12 03/04/2018

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button