Posted by Hemimech [162.158.75.205] on Friday, January 20, 2017 at 21:33:59 :
In Reply to: Re: Distributor woes solved posted by Kaegi [108.162.246.44] on Friday, January 20, 2017 at 18:20:29 :
I never worked on a 251 but looking at the picture Chris Chase posted on 1/19 19:55:55 you can see the large radius between rod journals #3 & 4. This radius is probably large enough to clear the shaft of the distributor...but not the driven gear. So if you were to try to remove the distributor while #1 was near BDC the radius area of the crank could trap it.
Follow Ups: