Posted by Galen [67.142.171.21] on Saturday, March 23, 2013 at 20:29:40 :
In Reply to: Problem getting the radiator bracket in place posted by Galen [67.142.171.25] on Saturday, March 23, 2013 at 18:27:20 :
I think that I may be able to notch out a little metal in the bottom of the radiator bracket to clear the lower crank pulley.
Also what is the effect if any, if I use the 5 inch diameter water pump pulley (for the 230 engine) as apposed to using the 7 inch diameter water pump pulley? I know that the fan should turn faster. The smaller pulley lines up closer with the crank pulley than does the larger one.