Posted by Galen [67.142.171.25] on Saturday, March 23, 2013 at 18:27:20 :
I have a question: I am trying to get my cooling system back together on my ffpw. I have a 251 ci engine in my '53 and the correct crank pulley (finally). When i go to put the radiator bracket back in, I find that the bottom part rubs against the front of the crank pulley when i insert the (captured) approx 3 inch long bolts on the bottom of the radiator bracket into the plate on the front cross member. Is there a way of working around this? Was there a different bottom plate on the later PW's? Even when I get the bracket in, there is precious little space between the fan and core even when the core is as far forward as possible (almost contacting the horizontal rear winch brace. I could use a good picture of how this all configured. Thanks in advance
Follow Ups: