|
|
Posted by Terry [74.15.34.217] on Tuesday, December 07, 2010 at 16:04:48 :
In Reply to: Re: Ok, Im ready for some good feedback.......Paint or powder co posted by Desoto61 [138.162.0.46] on Tuesday, December 07, 2010 at 09:26:29 :
I like the pic of the transfer case. They always look great when rebuilt. A word of caution though... the brake drum retaining nuts on the centre shaft output flange will hit the u joint retainer bolts. I did just the same mod on mine and when I went to install the driveshaft off of the brake drum flange I could not get the ujoint retainer bolts in the flange as the nuts on the drum interfered. Please check to see if you can install the 5/16" bolts in the u joint flange now before you get it under the truck. The solution is to put the nuts on the backside of the drum using no washers under the bolt heads. Hope yours is ok. Terry