|
|
Posted by Paul(in NY) [12.64.180.14] on Friday, April 16, 2010 at 17:24:28 :
In Reply to: Re: Front knuckle 25 ft lb drag...really? posted by Matthew [128.157.160.13] on Friday, April 16, 2010 at 10:31:11 :
I set mine for roughly 150 inch pounds, again its all feel. This feels good to me. I am hesitant to give that 150 inch pound number since I have no way to measure the pre load that it establishes, neither does anyone else. It may be right, it may be wrong. It all boils down to what in your 'opinion' feels correct. I even set my PG knuckles to 150 inch pounds with no seals, no axle shafts and tie rod removed. To come up with a actual figure would require lab equipment to measure the actual bearing preload.
Paul