Posted by Bob [172.70.42.5] on Friday, March 01, 2024 at 09:06:44 :
In Reply to: Re: Rear Wheel Bearings posted by Glenn in Maine [172.70.130.132] on Friday, March 01, 2024 at 08:17:45 :
After lubing the wheel bearings with grease tighten the nut down just a little then turn the wheel by hand then tighten it a little more and turn it then snug it but do not overtighten then bend a lock tab After driving a few hundred miles check the wheel by jacking up and see if there is any movement when pulling it and out on the topside of the tire if not you are good if its loose with any movement retighten by snugging it up some
Follow Ups: