Posted by Vaughn [172.69.140.145] on Saturday, February 03, 2024 at 17:46:02 :
Between rain and family stuff, I finally got some time to work on the truck. It's a slow process working on the trans cover and I have the two main pieces welded in place. The TC/brake lever seal cover will be high enough to clear the bend in the levers so they won't be an issue shifting with the M37 seal on. I'm going to make a ring for the trans shift tower and use a universal boot to cover it. Now to cut and weld additional pieces filling in to form the cover and while working my way out the right side. I have about 6 broken bolts to drill out of the cover, tried heating, no good, so I guess I'll drill them. Modifying the cover is a complicated little process. Nothing so far has been a frustrating issue just a challenge for my old brain :=)
Follow Ups:
