Posted by AAA on Wednesday, April 02, 2003 at 4:13PM :
In Reply to: Re: weld the... posted by mike stone on Wednesday, April 02, 2003 at 4:03PM :
No.
take (4) 6.5 big ring wheels and drill the rivets out - use the outer wheel section and big ring
take (4) 5.5 small ring wheels (6 vent hole type) and drill the rivets out - use the inner wheel/mounting face
weld the 6.5 outers w/ big ring to the dual inners, after determining the needed offset. That way I will have big lock ring dual wheels to accept 11.00x16.0 Michelins, and use single big ring non-dual wheels for the front. Keep the SRW axle under the rear to avoid rear spring interference, if needed.
Follow Ups: