Posted by Vaughn on Saturday, March 22, 2003 at 7:05PM :
In Reply to: Thickness of Cab Spacers on 48 PW posted by Willy-N on Saturday, March 22, 2003 at 11:16AM :
Front 1-3/4", rear 2" This is the clearance needed for the bigger transmission, but would probably work ok. Two general items:
1. The cab spacers have to be high enough to keep the transmission floor cover off the transmission 3/8" or so
2. The rear hood side lines should have an even gap between them and the cowl when your facing the side of the truck.
Rubber material makes for a quieter ride.
Follow Ups: