Posted by Willy-N on Monday, March 17, 2003 at 0:16AM :
It is now monted minuse two small angle brackets. I will get them tomorrow. My tank is not stock and is 18 by 24 and 10 inches high made out of alum. I mounted it just behind the cab in the center of the frame. I hung it with 8 bolts and a 3/16 inch diamond plate alum skid plate under it for extra protection. Looks pretty good being all alum and alum tube mounts with steel bolts inside them. I will go with 5/16 or 3/8 in steel line because my suction outlet is 1/2 inch ID pipe thread. I mounted a new PW sending unit in the tank so the stock gauges would work. Need to make my filler neck next and it will be on the drivers side near the cab just under the flat bed side. I will try to get a picture of it tomorrow. Thanks for the coments on the fuel lines. Mark H.
Follow Ups: