Posted by Willy-N on Thursday, March 06, 2003 at 10:36PM :
In Reply to: Re: Leveling a Flat Bed to the Cab?? posted by Dave jensen on Thursday, March 06, 2003 at 10:05PM :
This one the tires just fit inside the outside frame so I have 2 inches of clearance up for the tires. I can lift it 2 more inches for more room. The flat metal is all that is above the tires. It has 2 rails that go from front to rear just above the PW frame and 4- 2 in box steel mounts that come down off them. I will weld them to 2 inch by 3 inch angle iron brackets to bolt to the sides of the PWs frame and sit on top of it also. The underside is all box steel and so are the sides. There are several cross rails that support the bed metal. I can adjust the height by the 2 inch box off the frame above the angle iron bolted to the PWs frame. I got the bed for 150.00 and could not turn it down. Needs re/painting again and a Rhino coating on the flat metal area. I want the rack plum to the back of the cab so I will level it to the frame and ignore the hump. Mark H.
Follow Ups: