Posted by Willy-N on Wednesday, February 12, 2003 at 11:10PM :
In Reply to: Hey Willy-N! posted by MikeC on Wednesday, February 12, 2003 at 8:28PM :
I got it thru www,northerntool.com I think that is there address. It was around 50.00 and hooks to the end of you presure washer. If you have a 3,000 psi one it works great and I use 20/30 silica sand thru it. Just put the sand in a barrle and stick the tube in it and blast away. I did the Tucker Sno Cat with about 750 lbs of sand to remove all the paint to bare. Dose not get dusty or get the metal hot because of the water mixed with the sand. I relly like it but winter time makes it hard to use unless you want Ice all over the place! I get the sand at the lumber yard 6.00 per 100 pounds or about 50.00 to do the Sno-Cat with not a bad cost. Mark H.
Follow Ups: