Posted by mike on January 31, 1999 at 10:46:44:
I have a '79 Power Wagon with a 360 and electronic ignition. Last summer I took the box off to do some repairs and rust-proofing. I started it once when the box was off and moved it around,then I parked it and it sat for about 5 months. When I got the box done and ready to go back on the truck it wouldn't start. I couldn't get it to start with starter fluid. So I pulled the coil wire and placed it 1/4in from a ground and didn't get any spark. I checked for spark at the plugs and there wasn't any. I checked the coil,rotor and cap,all were good. On a hunch I replaced the ignition module and the ballast resistor and still no spark. I would appreciate any advice that you could give.
Thanks!