Posted by Greg Coffin on Monday, December 23, 2002 at 11:03PM :
In Reply to: I need 15 Roller Bearings for Transfer Case Shaft posted by Willy-N on Monday, December 23, 2002 at 10:50PM :
Any bearing house or good autoparts store will have them. If you go to an auto parts store, you can tell them you need the input shaft pilot rollers for a New Process 205 (these parts interchange with the NP 200 and NP 201 transfer cases). Or you can give them this part number BCA QRB-23549 (it's the same part). The BCA number works will at a bearing house. Or you can get these from someone that deals in Power Wagon/M37 parts. Sometimes they are cheaper.
Or (shameless plug here) you can buy a copy of my Power Train Survival Guide, and save Joe the bandwidth.
Greg
Follow Ups: