Re: Re/Did the Rear Seals, Bearings, PTO and More today!


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Vaughn on Sunday, December 15, 2002 at 10:44PM :

In Reply to: Re/Did the Rear Seals, Bearings, PTO and More today! posted by Willy-N on Sunday, December 15, 2002 at 7:41PM :

Inside the axle trunnion is a bronze axle bushing and seal. If the knuckle (spindle) is off, you can look inside and see them. They are probably the originals and should be replaced

You want two:
- trunnion socket bronze axle bushings
- Inner drive axle oil seals for the tunnion socket
When you assemble, drive oil seal in with bushing at the same time.

If your not taking the knuckle flange apart, then at least you want two knuckle repair kits to:
- Adjust your knuckle drag,
- Replace the worn felt seals that surround the "round knuckle area" (soak felt in oil before assembly)

If both the differential carriers are off, then you want two drive pinion carrier gaskets. You may want to order a couple extras for spares.

Good Luck!




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com