Posted by Willy-N on Sunday, November 10, 2002 at 11:51PM :
In Reply to: getting the frame ready to pull back in the garage posted by Junkyard dog on Sunday, November 10, 2002 at 3:52PM :
If you have a good Presure Washer you can get a Sand Blasting atachment for it that goes on the end from Norther Equipment. Then you use water pressuer and sand being sucked into the tip to blast off the frame with. You could do it at home not have the problem of sand dust everywhere. I use one quite alot and they are fast and work good if you have at least a 3,000 psi 4 gal per min washer. 30/20 sand works the best in them. You could do the frame in less than 5 hours of time. It would take about 500 to 1,000 lbs of sand to do the frame and when the wet sand drys you could sweep it up or just blade it into the gravel driveway like I do with the Tractor. Mark H.