Re: more PTO questions


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Vaughn on Friday, August 09, 2002 at 10:53AM :

In Reply to: more PTO questions posted by cliff/utah on Thursday, August 08, 2002 at 9:38PM :

The flat fenders came with three different PTO's

1. The up-to-type tranny PTO 46-52;
2. The after-type-tranny PTO 52-56;
3. The NP420 PTO 56-71

PTO built for the drivers side work only on that side. They run off the second gear of the bottom cluster gear. If you want to mount a PTO on the right side, look for one made for that side. You can mount a left side PTO on the right side, but you will need to figure out how you plan to shift it to engage the PTO since the shift lever mounting will place the lever towards the ground.

You also need to determine which PTO you have for which of the trannies above. 1 and 2 are spur gears, 3 is a syncro. 1 will interchange with 2 using a 1/4 inch spacer. 2 will not interchange with 1 (smaller tranny) Good Luck!



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com