Re: PTO Questions


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dan Lowe on Friday, July 05, 2002 at 10:19PM :

In Reply to: PTO Questions posted by Keith ( Alberta) on Friday, July 05, 2002 at 11:16AM :

The pto's from a synchro and non-synchro transmissions are different. The non-synchro has straight cut gears and the synchro has bevel cut gears. What you will have to find is a pto that matches your 420 trans. If you find a pto with bevel cut gears it will only work if it has the correct input gear. Each transmission has gears that are of a different pitch. The pto that you find will need to have an input gear of the same pitch as the 420 trans. Be careful when buying a used pto because it is near impossible to find the correct input gear to put into the pto if it does not come with the correct one. If you want I can send you a faxed set of papers on a dana 35Y pto(the predecessor to the 352) which shows the numbers of the input gears that are required for different transmissions along with thier gear pitches.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com