Re: Dana 70 takes SAE 140 oil...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by RDavis on Sunday, June 30, 2002 at 3:37AM :

In Reply to: Dana 70 takes SAE 140 oil... posted by Rob Steller on Saturday, June 29, 2002 at 11:57PM :

I do not believe the front axle on a WM300 is a 70-F. My book calls for grease,but I use the water resistant blue grease inside the knuckle. The bronze bushing is oil impregnated I believe and needs very little lubrication if lockout hubs are used and the front drive is seldom engaged. The front steering knuckle was not designed for oil as it does not generally seal good enough to hold hypoid oil and I believe that hypoid oil is not good for bronze bushings and bearings?



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com