Re: rearching a leaf spring


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by AAA from 208.190.56.129 (isdn-208-190-56-129.telespecialists.com) on Monday, April 01, 2002 at 10:33AM :

In Reply to: rearching a leaf spring posted by UTAHCLIFF from 208.6.230.92 (?) on Sunday, March 31, 2002 at 8:47PM :

you should experiment with another spring to see if you can do it yourself.

I understand that you could get a 6-8" piece
of pipe, and weld it to a heavy base, horizontally.

Then you strike the spring starting at one end, move it 8-10 inches and strike it again, working your way to the other end.

You could lay the spring out on a piece of plywood, cardboard, etc., with the spring on its side. Outline it with a pencil, then compare it after you re-arch it to see what happens. It can be done. You are supposed to only strike each section one time, not too soft and not too hard.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com