Posted by Clint Dixon from 63.91.25.168 (qco25.qconline.com) on Wednesday, March 20, 2002 at 12:28PM :
In Reply to: Re: Crank case venting posted by Randy Baker from 64.12.103.41 (spider-mtc-tf051.proxy.aol.com) on Wednesday, March 20, 2002 at 10:03AM :
Because it is meant to draw fresh filtered air to the crankcase, rather than vent blowby, the tube from the oil filler neck goes to the airhorn of the carburetor. It enters the airhorn immediately above the choke butterfly. This location is below the air filter, so any blowby back through the tube will enter into the carb without effecting the air filter.
Hope this helps ;^)
Clint
Follow Ups: