Posted by Lyle Van Wert on Saturday, March 16, 2002 at 10:56PM :
The Power Wagon is very rough but the Bell body is quite nice and is 95% equipment complete. Has two winches. Main front winch is the biggest factory installed winch you will ever find on a flat fendered PW. Shaft is much larger diameter than stock winch and the shaft runs left and right the full width of the truck and is pin indexed for double cat heads. PTO runs through winch to power the pole auger which is hung and raised by the factory "A" frame ginpole on front. Second winch is located on top of a pedistal in front right corner of utility box which moves the boom up and down. Both winches run at the same time at variable different speeds made possible by a multiple PTO outlet box (up to four PTOs at once). Utility box is aluminum with sliding top. This truck looks just like the Eyrtl Model except it has a boom instead of the derrick. Auger is with the truck but 90 degree gear box is missing. Not running, radiator missing, running boards fllling off. $2600. Located in Michigan. 989-366-0860