Posted by Rob Steller on Thursday, March 14, 2002 at 0:34AM :
In Reply to: W300---M715 wheels posted by Mark S. in Calif on Thursday, March 14, 2002 at 0:18AM :
Yes, the Jeep M715 5/4 ton truck has the same 6 bolt pattern as our W300's. The original M715 wheel was assembled by Motor Wheel Co. as I recall, not Budd like ours, but used the same rim and lock ring, just a different center dish. They had 6 vent holes, like the pre-60 W300 had, and were set up to be 1" farther out than the W300 rim. I've got a set on a D300 chassis "farm wagon" Also, the M715 rims were welded, not rivited, and seem to run truer than the W300 rims I've seen. Rob
Follow Ups: