Posted by Cheyenne Dave on Friday, February 22, 2002 at 9:06PM :
I guess this question would go out to those folks that currently have their front axels disassebled. I would like to know the measured distance from the bottom of the differential side gears to the outside of the left and right axel tube bushing faces. By "bushing faces", I mean the surface that the inner axel shafts seat against when fully inserted into the axel housing. Just run a tape measure into the axel tube until it bottoms out in the splined side gear and record the measurement to the outside face of the inner axel bushing. Thanks in advance!
Follow Ups: