Posted by Craig [172.71.146.170] on Wednesday, November 08, 2023 at 16:56:46 :
I fired the poly today for the first time today. Had a bad ballast resistor and had the distributor in 180 out but got past both of those. finally got the oil pump primed after I figured out that I had the oil filter lines reversed. I have a bad carb leak out of the accelerator pump shaft will have to check the fuel pressure first and see if it has too much. ran it for about 15 seconds till I saw the fuel leaking. used a small block pump and reworked the arm as I could not find the proper pump for it. will get back on it tomorrow. More to come.
Follow Ups: