Posted by Vaughn [172.69.140.184] on Saturday, November 04, 2023 at 18:27:05 :
I did a lot of searching on the internet looking at motor mounts those that bolt to the 4 front motor mounts bolts, to all kinds that bolt to the side of the engine. After all that I found a set that is going to work very well. They bolt to the side of the engine, and are adjustable. They are not long enough to go all the way to the inside of the truck frame to bolt up, so I am going to use frame hangers and they will be perfect width using the last bolt hole. I didn't want to fab something going from the side of the engine to the bolt on the cross member, to far and may cause too much stress on the side of the engine. Attach are two image showing how I plan to mount them against the truck frame.
Follow Ups: