Posted by john r eickhof [172.71.150.63] on Thursday, July 13, 2023 at 16:03:02 :
In Reply to: Re: pto control cable for 58 W 100 posted by Craig [172.71.147.121] on Thursday, July 13, 2023 at 14:14:25 :
b, (from factory) so either one will work fine.e sure to check the size and thread of the pto shifter, then make sure the cable has solid shaft to thread into the pto, dont order a single strand wire type control as they are not strong enough to push the shifter back into neutral, then a simple steel bracket with a hole drilled in to pass the fitting on the casing through will work fine. also, not all dodges i have owned had a T handle, some had a larger red shift type knob