Posted by john eickhof [172.71.147.155] on Saturday, January 14, 2023 at 20:43:59 :
In Reply to: Re: 9376 wheel cylinder posted by Jerry Henry [172.71.147.96] on Saturday, January 14, 2023 at 20:16:00 :
i have used brake parts from all over the world, only problem i had was poor quality rubber cups and caps mainly from items marked in korea and india, otherwise castings are good although they may be rough on the outside but its the inside bore that is critical, the leak doesn appear too bad, why not get a hone and a $6 rebuild kit? as long as the pistons are not rusted or scored badly...earlier post was referring to 'murphys law' thus in thepast, i always do all at once plus you then have no guesswork as to what was replaced when....plus its easier while you have all the tools out to do thye job! if i lived closer i would gladly lend you a hand! I did brakes for a living for decades....from vw bugs to semi-trucks! and lots of power wagons in between!