Posted by Ray [108.162.221.188] on Tuesday, October 11, 2022 at 21:50:47 :
In Reply to: Re: Stud to Mount 3/4 Ton 3rd Member to 1/2 Ton Axle Housing posted by Vaughn [172.71.154.2] on Tuesday, October 11, 2022 at 15:15:11 :
Always easy to anneal the pieces with a torch and allowing to cool slowly
As I mentioned that removing the hex on a lathe or by other means, and additional threading may be needed
Then of course retemper the pieces when completed