Posted by Bob [172.70.134.195] on Tuesday, August 16, 2022 at 09:07:37 :
In Reply to: Re: Wheel bearings? posted by Bob [172.70.38.3] on Tuesday, August 16, 2022 at 08:49:11 :
Also when I grease and install the bearings I tighten the nut with a large pair of channel lock pliers then spin the wheel and tighten good again may have to tighten a little bit more to get the lock to line up but not much then after about a thousand miles or so recheck to see if there is any play in the wheel by jacking it up and see if there is any sideways movement probably good but if any looseness re tighten it good with the pliers it always worked good for me Happy Motoring