Posted by Bruce in BC [162.158.146.43] on Tuesday, June 14, 2022 at 16:44:49 :
In Reply to: Front axle caster posted by Torvald [162.158.107.172] on Tuesday, June 14, 2022 at 16:35:34 :
I run 5 - 7 degrees when setting up a straight axles. Quite often you can check by using a machined flat spot that is part of the top knuckle.
Steering arm may work as well. Be careful with shims in the front - very often they crack and come loose.
Follow Ups: