Posted by John B [172.70.178.129] on Wednesday, March 16, 2022 at 09:42:14 :
In Reply to: Re: Close call - part 2, resolution posted by Doc Dave [172.70.134.237] on Monday, March 14, 2022 at 11:33:52 :
Been there, done that. See the Archives #570, "Fuel Pump Failure" under a post by AVaughn on August 13, 2021.
If about 3/8 of an inch of one end of the pin were knurled by the manufacturer, then driven into place, it would probably stay in place. JJB.