Posted by Keith in Washington [162.158.107.186] on Saturday, February 05, 2022 at 18:41:55 :
In Reply to: 2 questions posted by [email protected] [172.69.170.151] on Saturday, February 05, 2022 at 13:56:41 :
Put the mechanism in the door from the bottom. Move so the rod actuator is sticking up through the the slot for the window. Hold it by the actuator, move it to the rear of the door. Rotate the latch mechanism which is L shaped so that it goes beside the window channel then rotate the rod which will rotate the latch mechanism behind the window channel. Line up the holes and put the screws in. Now you can let the rod fall back inside the door and hook up the handle mechanism and screw it into place.
Follow Ups: