Posted by Vaughn [172.68.132.222] on Monday, November 15, 2021 at 08:56:31 :
In Reply to: Re: WM300 brake backing plate replacement posted by Big red [172.70.110.241] on Sunday, November 14, 2021 at 19:38:02 :
Make sure the bolt shoulder goes all the way through the brake support plate and axle housing flange, and is slightly under the outside of the flange. You don't want any threads in that area or the plate will work back and forth. You may need to custom cut threads to achieve that if you can't find bolts in the correct length.
Follow Ups: