Posted by jim w starkey [172.70.130.213] on Saturday, July 17, 2021 at 21:27:30 :
In Reply to: Re: vent style window glass install posted by Hayden [108.162.219.181] on Saturday, July 17, 2021 at 15:37:24 :
I just did this again..Put vent window in and mark where the rubber ends on top..take vent back out..install weather strip in channel and stop at mark on top.Bolt in window regulator and bolt in front window channel with one bolt on bottom and let it lay forward.put in window glass and keep it pressed in rear channel as you lower it on to rollers..when you have the rollers in push the front window channel in place and bolt in then put vent in..it worked for me..