Re: Full flow oil filter conversion


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by oscar on Sunday, January 20, 2002 at 11:35PM :

In Reply to: Full flow oil filter conversion posted by Matt Wilson on Sunday, January 20, 2002 at 8:44PM :

You can convert to a full-flow. The oil pump cover plate must be replaced with an adapter to permit the oil to flow to the filter and the block main oil gallery must be tapped into to recieve the output line from the oil filter. The original output port in the oil pump is plugged to direct the oil to flow out through the adapter plate that replaced the oil pump cover plate.

The conversion can be done but you need a machine shop just to get started.
It might be easier to just convert to a 318 poly, slant 6 or a MARS repower kit.
oscar



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com