Posted by bruce in bc [162.158.255.221] on Wednesday, March 17, 2021 at 00:21:35 :
In Reply to: Re: I needed a replacement output shaft - that is a custom piece posted by Michael Hernke in AR [108.162.238.6] on Tuesday, March 16, 2021 at 22:05:30 :
Mine is a Ford 31 spline - i did not break it but found wear on the shaft where the roller bearing rides. Stock 205 inputs are 32, 31, 29, 23 and 10 spline. May be a couple i missed but there was no OEM spline count above 32. After market does make some crazy bigger diameter shafts but you are looking at some serious change when you get to those numbers.