Posted by Vaughn [172.68.189.172] on Tuesday, November 24, 2020 at 10:12:08 :
In Reply to: picture needed of an Arrow pto lever mounting posted by DodgeBoy [172.68.65.37] on Tuesday, November 24, 2020 at 08:10:05 :
The standard PTO installed from the factory on Dodge trucks, WC's and the FFPW, was a Detroit Harvester PTO made in Detroit. You probably have the only WM300 with a Braden/Arrow Gear PTO. If you don't have a pivot slot similar to the ones found on the DH PTO for the lever, then Braden used a different method to engage that PTO. This means you'll need to fabricate a method to engage/disengage your PTO, or switch out the Braden for the standard DH PTO.
Follow Ups: