Posted by Dean in CA [108.162.245.97] on Sunday, November 22, 2020 at 22:36:13 :
In Reply to: Re: Doesn't the 331 block already have a bellhousing? posted by dpower [162.158.74.64] on Sunday, November 22, 2020 at 16:42:22 :
Remember unless you find a truck hemi with
a manual 4spd or 5spd behind it a car hemi
will not have the crank drilled for a pilot
bushing. You will need a machine shop to drill
the crank for the correct size to fit your input.
So if using a NP420 to operate the winch a 315
bell housing will fit any early hemi.
Follow Ups: