Rear Spring removal


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Galen [172.69.6.125] on Monday, July 20, 2020 at 15:39:20 :

A little while back I started a thread on removing the rear leaf springs from my B4. As it turned out, after easily pulling out the front pins I decided to remove the rear spring shackle while still attached to the spring. This was easy since there is a small hole in the frame rail allowing access to the shackle pin. It came out easy with a couple of taps with a punch and hammer. For the right side I had to remove the gas tank to gain access. No big deal since I wanted to take out the tank anyway. I discovered there is considerable wear in the shackle hole (slightly egg shaped). I am now in need of two rear spring shackles for my truck.... Any offers?



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button