Posted by Dean in CA [162.158.246.43] on Sunday, April 19, 2020 at 20:22:36 :
In Reply to: Re: Braden Winches posted by Kaegi [108.162.246.230] on Sunday, April 19, 2020 at 18:14:14 :
The front bumpers will hit the ground before the winch. The MU3 sets on the frame at the
rear just as does the MU2. With no cable guide on the front to raise the winch as in the MU2
the MU3 sets flat on the frame lower and is still above the bottom of the bumper.
It will cause interference with the cross member especially on trucks with the high PTO output.