Posted by Tim Holloway [162.158.63.215] on Thursday, April 09, 2020 at 07:37:38 :
In Reply to: Wont start posted by Lee in idaho [172.69.71.97] on Tuesday, April 07, 2020 at 21:29:28 :
Try replacing your spark plugs. I have seen several instances on a no start situation where after tons of cranking the plugs get gas soaked and will not fire. After replacing this and that, you eventually fix the original problem, but it still wont start, because of the plugs. Also, take a look at your oil, all the cranking can dump unburned gas through the cylinders into the oil, thinning it to the point of it not being heavy enough to keep a film of oil on the cylinder walls which lowers your compression, again no start.
Been there, its frustrating as all get out!
Follow Ups: