Posted by Howard [162.158.63.5] on Monday, December 02, 2019 at 19:01:36 :
In Reply to: Backhoe grease fittings posted by Perry [162.158.63.221] on Monday, December 02, 2019 at 18:50:36 :
grease must be hard.. take the fitting out and see if you can dig out any old grease.. heat it up if nessasary.. if you have a portages power the thread on the end of it should be 1/8 pipe.. thread the hose in the grease fitting thread and pump fluid in it.. last resort remove pin and clean out the whole..